Use precautions of Laminating Machine

1. The power switch box must be a power switch box with a ground wire to ensure safe use of electricity;

2, the film coating workshop is best clean room to ensure the film coating effect;

3. The dust on the equipment and the rubber roller must be completely removed before the film is coated;

4. When the laminating machine is running, it is forbidden to put your fingers into the two rollers to avoid getting the hands; the temperature of the press roller of the machine is high, don't touch it with your hands to prevent burns;

5. Do not disassemble the door panel of the chassis while the machine is running, so as to avoid electric shock or injury to the gear;

6. When performing maintenance or maintenance inspection, it must be ensured that the main power supply is cut off and no maintenance or repair is required.【 Water Based Lamination Machine 】The electrical system of the machine should be well insulated to prevent moisture. When using the machine, the power should be cut off to prevent accidents.

7. Disassemble the heating pipe during maintenance or repair, please handle it with care, so as not to damage the heating pipe;

8. During inspection or maintenance, it is found that the oil flowing out under the bearing should be wiped out to prevent oil from flowing into other parts to affect the normal operation of the machine;

9. Do not operate more than one person when debugging the equipment. The operator must ensure that no one touches the moving parts;

10. Every time you turn on the machine, wipe off the surface dust of each roller, and check whether the surface of each roller of the machine is clean. If the machine malfunctions or abnormally sounds, you should analyze the cause and give it a rule.【Laminating Machine Supplier 】The standby device can continue to use after everything is normal. machine;

11. When the machine is scrubbed, it should be turned on at a low speed. It should be scrubbed in the correct position to prevent the cloth in the hands of the two rollers from being rolled.

12. It is strictly forbidden to place any tools, devices and sundries on the machine;

13. The machine used for new installation should be strengthened to lubricate the machine. Do not use the machine quickly during the running-in period of the machine drive.

The ways to laminate the film

The coating process can be divided into cold (cold pressure) coating, hot (heating) coating and liquid coating according to the heat, pressure and material. Thermal coating technology refers to heating and pre-coating the adhesive on the diaphragm, through which the film is bonded to the printed product; while the cold coating is pressed, directly bonding the film to the printed product by the adhesive. Together. Both methods can produce various special films such as UV protective film, waterproof or anti-friction film. Recently, there has also been a new technology called "liquid film". Simply use a brush, spray gun, roller or special laminator to apply a film directly on the surface of the product. Although the technical operation is simple and the price is low, it is still not mature.

Small laminating machine laminating process. This type of small laminator was developed to meet the needs of low-to-medium consumers.【Automatic Laminator】This kind of small laminating machine solves the fundamental problem of the ordinary laminating machine. The price of the laminating machine is between 1400 and 1500 yuan. Since the film is pressed by the inner hot rubber roller, the film is heated up and down, which increases the heating time of the precoating film, and It is heated and balanced, so the film that is covered is smooth and bright, and it has the same effect as the film coated by the high-grade laminating machine. Only such a small laminating machine has a heating power of only 500 W. Although the temperature is adjustable, the speed is fixed, and the film can be pressed 0.7-0.8 m per minute. Suitable for business card lamination, recipe film, photo film and graphic print film, especially for small printing houses, typing and copying shops, business card production companies and photo studios.【Film Lamination Machine】In order to reduce equipment investment and reduce costs, this type of film is used. There are more machines.At present, the market prospects of such small laminating machines are very good. Many customers who used to use them have later started sales of such laminating machines, and the sales volume is also good. It can be said that this small laminating machine is the most cost-effective. It is easy to use and has obvious effects. It solves the needs of some small end customers and has a great promotion value.

Film inspection before running the semi-automatic laminating machine

After the semi-automatic laminating machine is adjusted, the pre-processed printed matter is fed into a paper feeding mechanism for lamination, and samples are taken for inspection. Before the film is covered, a small amount of printed matter is used for inspection to avoid a large amount of waste. [  Semi automatic lamination machine  ] After the test is passed, large-scale production can be carried out.


The film inspection method is as follows:
1. 
The semi-automatic laminating machine peels off the corner of the sample film which is completed by the film in the width direction, presses the paper, tears all the width direction, and after all tearing and tearing, if the surface of the printed matter is imprinted with the rubber layer The transfer of the fibers of the paper to the film indicates that the printed matter adheres well to the film and is a qualified product.

2.
Semi-automatic laminating machine put the coated sample into the drying tunnel, baking at 60 ~ 65 degrees Celsius for about 30 minutes, if there is no foaming, no delamination, no wrinkles, is a qualified product. [ Manual Lamination Machine ] The film peeled off after baking should not be separated from the paper.

3. 
The semi-automatic laminating machine takes the sample into cold water for 1 hour and then takes it out. If the plastic film and the printed matter are not separated, it is a good product.

4. 
The semi-automatic laminating machine puts the sample on the creasing machine and presses it. If the concave and convex parts are not delaminated, it is a good product.