Thermal Film Laminating Machine

In this machine, the film is formed once, the glue has been applied to the consumables, the glue is melted by heating when the film is coated, and the film is bonded to the printed matter by pressure. This type of laminating equipment is cheap, easy to operate, and does not generate harmful gases during operation. [ Film Lamination Machine ] It is a trend in the development of laminating film. In today's society where environmental protection is increasingly concerned, it is believed that this technology will one day replace the pre-coated film. The main coating technology in the domestic printing industry. The disadvantage is that this technology is not very mature in China, and there are still some problems to be solved, such as: single-sided film curling (has a single-sided anti-curl machine, but the price is higher), the print with silicone oil is difficult to cover Membrane and the like. Widely used in short-run printing, digital fast printing industry.

The pre-coating laminator is a special device that combines printed matter with pre-coated plastic.[ Thermal Lamination Machine ] Compared with the coating type laminating machine, the biggest feature is that there is no coating and drying part, so the laminating machine is compact in structure, small in size, low in cost and easy to operate, with stable product quality.

How to properly store white glue ?

                                 
                                Thermal Lamination Machine


01
Store before opening
Avoid glue exposure, rain (will reduce glue storage time, reduce stickiness)
Keep the room temperature at 15-25 degrees Celsius (storage temperature below 8 degrees Celsius will reduce the glue adhesion, below 4 degrees Celsius will lose the viscosity of the glue).

02 
Stored after opening
Do not infiltrate other substances into the glue bucket, otherwise local clumping, discoloration and deterioration will occur. [ Automatic Thermal Lamination Machine ] There is no need to add water to adjust the quality, and the addition of water will reduce the bonding strength of the glue, so the paste effect will not be achieved. Seal the plastic bucket and plastic bag immediately after use according to the amount until the next time you use it again. 

03
Storage after use
Clean the rubber bucket and plastic bag mouth and seal them intact, so as to prevent the dry film of glue remaining in the mouth of the barrel or the bag from falling into the glue, thus causing granulation. If it is not sealed, the glue will peel.
The pumping pump is immediately pumped into clean water to avoid accumulation of residue and gelation after solidification, which may cause blockage and affect production and use.

Film Laminating Process

Film coating refers to the transparent plastic film applied to the surface of the printed matter by hot pressing. After the film is covered, the film is smoother and brighter. The color of the graphic is more vivid. At the same time, it is also waterproof and antifouling. It can be divided into surface processing and forming. Hot stamping, glazing and other processing techniques; molding process. The film not only makes the surface of the printed matter wear-resistant, folding-resistant and chemically resistant. However, traditional plastic films are not degradable, difficult to recycle, and easily cause pollution. 

Therefore, in the major printing cities, environmentally friendly PET films are used to improve the laminating process. The film laminating machine manufacturers have also developed various excellent equipment for PET slitting (such as chain knife slitting) to complete the elegant upgrade in laminating process.