Use precautions of Laminating Machine

1. The power switch box must be a power switch box with a ground wire to ensure safe use of electricity;

2, the film coating workshop is best clean room to ensure the film coating effect;

3. The dust on the equipment and the rubber roller must be completely removed before the film is coated;

4. When the laminating machine is running, it is forbidden to put your fingers into the two rollers to avoid getting the hands; the temperature of the press roller of the machine is high, don't touch it with your hands to prevent burns;

5. Do not disassemble the door panel of the chassis while the machine is running, so as to avoid electric shock or injury to the gear;

6. When performing maintenance or maintenance inspection, it must be ensured that the main power supply is cut off and no maintenance or repair is required.【 Water Based Lamination Machine 】The electrical system of the machine should be well insulated to prevent moisture. When using the machine, the power should be cut off to prevent accidents.

7. Disassemble the heating pipe during maintenance or repair, please handle it with care, so as not to damage the heating pipe;

8. During inspection or maintenance, it is found that the oil flowing out under the bearing should be wiped out to prevent oil from flowing into other parts to affect the normal operation of the machine;

9. Do not operate more than one person when debugging the equipment. The operator must ensure that no one touches the moving parts;

10. Every time you turn on the machine, wipe off the surface dust of each roller, and check whether the surface of each roller of the machine is clean. If the machine malfunctions or abnormally sounds, you should analyze the cause and give it a rule.【Laminating Machine Supplier 】The standby device can continue to use after everything is normal. machine;

11. When the machine is scrubbed, it should be turned on at a low speed. It should be scrubbed in the correct position to prevent the cloth in the hands of the two rollers from being rolled.

12. It is strictly forbidden to place any tools, devices and sundries on the machine;

13. The machine used for new installation should be strengthened to lubricate the machine. Do not use the machine quickly during the running-in period of the machine drive.

Film Lamination Process

The coating process can be divided into cold (cold pressure) coating, hot (heating) coating and liquid coating according to the heat, pressure and material. Thermal coating technology refers to heating and pre-coating the adhesive on the diaphragm, through which the film is bonded to the printed product; while the cold coating is pressed, directly bonding the film to the printed product by the adhesive. Together. Both methods can produce various special films such as UV protective film, waterproof or anti-friction film. 【Film Lamination Machine 】Recently, there has also been a new technology called "liquid film". Simply use a brush, spray gun, roller or special laminator to apply a film directly on the surface of the product. Although the technical operation is simple and the price is low, it is still not mature.Small laminating machine laminating process.



This type of small laminator was developed to meet the needs of low-to-medium consumers. This kind of small laminating machine solves the fundamental problem of the ordinary laminating machine. The price of the laminating machine is between 1400 and 1500 yuan. Since the film is pressed by the inner hot rubber roller, the film is heated up and down, which increases the heating time of the pre-coating film, and It is heated and balanced, so the film that is covered is smooth and bright, 【 Fully Automatic Lamination Machine 】 and it has the same effect as the film coated by the high-grade laminating machine. Only such a small laminating machine has a heating power of only 500 W. Although the temperature is adjustable, the speed is fixed, and the film can be pressed 0.7-0.8 m per minute. Suitable for business card lamination, recipe film, photo film and graphic print film, especially for small printing houses, typing and copying shops, business card production companies and photo studios. In order to reduce equipment investment and reduce costs, this type of film is used. There are more machines.【 Good Laminating Machine 】At present, the market prospects of such small laminating machines are very good. Many customers who used to use them have later started sales of such laminating machines, and the sales volume is also good. It can be said that this small laminating machine is the most cost-effective. It is easy to use and has obvious effects. It solves the needs of some small end customers and has a great promotion value.

Instant Water-based Film Laminating Machine

Characteristics of instant coated products

Thermal Lamination Machine

(1) It is prone to foaming and film detachment. In large-area solid printing or high humidity working environment, foaming and film removal are particularly serious.
(2) The surface of the product often produces bright spots or fog points with different gloss.
(3) The product is prone to curling. If the pressure is too high when the glue is applied or the temperature is too high during drying, 【 Manual Lamination Machine 】 the curling phenomenon is more serious.
(4) Chemical substances such as organic solvents will volatilize into the atmosphere during filming, causing environmental pollution and even causing fires.


Characteristics of pre-coated film products
(1) The film-forming product using the molten pre-coating film does not exhibit foaming and film peeling, and the product has a long service life.
(2) The film-coated product using the solvent-evaporable pre-coating film may have a large thickness in the printing ink layer, where the folding, die-cutting, and indentation pressures are relatively large, or in a high-temperature environment, the film may be released and foamed. phenomenon.
(3) The solvent-evaporable pre-coating film easily adheres to impurities such as dust during production, 【Film Lamination Machine 】thereby affecting the surface effect of the film-coated product.
(4) The film product is basically free from curling.
It can be seen from the above that the pre-coating film coating process, especially the molten pre-coating film coating process has the advantage that the coating film coating process cannot match, and is an inevitable choice for the future film coating industry.

Two Types of Film Laminating Machines

The laminating machine can be divided into two types: instant coating laminating machine and pre-coating laminating machine. It is a special equipment for paper, board and enamel film. It is pressed together by rubber roller and heating roller to form a product of paper-plastic integration. That is, the coating laminating machine includes sizing, drying and heat.[  Film Lamination Machine  ] Three parts of pressure, its wide application range, stable and reliable processing performance, is widely used in China. Pre-coated laminating machine, without glue and dry parts, small size, low cost, flexible operation, not only suitable for laminating processing of large-volume printed materials, but also suitable for coating of small batches and scattered printed materials such as automated desktop office systems. Very promising.


The laminating process is a surface processing process after printing, and is also known as post-printing. Post-press silicone or post-printing film refers to a film processing machine that covers a surface of a printed product with a transparent plastic film of 0.012 to 0.020 mm thick to form a paper-plastic product processing technology. The laminating machine is used to complete the laminating process. Generally speaking, according to the process used, it can be divided into two types: the coating film and the pre-coating film. [  Water based Lamination Machine  ] According to the film material, it is divided into two types: a bright film and a matte film. The main problems affecting the laminating process: affecting the health of the operators, there are fire hazards; the paper and film materials after lamination are difficult to recycle, wasting resources.

How large is the lamination strength ?

Refers to the bond fastness between the plastic film and the paper (board) print in the film product. The size depends on the adhesion between the plastic film, the paper (board) print and the adhesive (or hot melt adhesive). [ film lamination machine ] When laminating, the adhesion is mainly derived from the mechanical bonding force and physico-chemical bonding between the plastic film, the paper (plate) printing article and the adhesive (or hot melt adhesive).

               Fully Automatic Thermal Film Laminating Machine

The key to film fastness is the affinity of the glue to the print (ink and substrate). As a film coating industry, printing inks are not selectable, that is, only the film that is suitable for the ink market is the only choice, so as a pre-coating film, it can only be regarded as high quality by adapting to the performance of all inks.[ lamination machine manufacturer ]. The composite strength of the coated product is affected by the process parameters in the film production process, such as the temperature, pressure, speed of the coating process, the coating condition of the adhesive, the film tension and environmental factors. At the same time, it is affected by the printing process, such as the surface state of the printed product formed after printing, such as the thickness of the ink layer, the area and distribution of the image, the characteristics of the ink, the use of the thinner, the use of dusting, and the drying of the ink layer.