Maintenance of laminating machine

1. Always check whether there is glue or grease on the rubber roller. Do not let the protective film directly stick to the rubber roller. Clean the glue, grease or dust on the rubber roller in time, especially some glues that are easy to cure. The surface of the rubber roller is clean and bright;

2. After each use of the machine, be sure to clean the machine immediately to avoid affecting the quality of the film during the next use. Wipe with glue thinner (alcohol or xylene) and rub the rollers with a soft towel. Blade) Touch and scrape the surface of the rubber roller, otherwise the flatness of the rubber roller will be destroyed or completely destroyed until it can not be used;

3. If the rubber roller 【 Hand Lamination Machine 】 needs to stop rotating for a long time, the heating of the heating pipe must be stopped first, so as to avoid the excessive temperature burning the rubber roller and affecting the temperature balance of the rubber roller surface, directly affecting the film coating effect;

4. Please stop heating after use, wait for the temperature to drop below 80 °C, then stop the rotation of the rubber roller and raise the rubber roller, and finally turn off the power; if there is automatic shutdown function, please select this function and then turn off the power;

5. It is necessary to ensure the cleanness of the laminating equipment for a long time, especially the cleaning of the rubber roller and the platform and the balance roller; every shift is checked once a day;

6. When filming, ensure that there is no sliding between the inner tube of the film 【 Sheet Lamination Machine 】 and the fixed card to avoid affecting the quality of the film due to uneven tension;

7. When operating the touch screen, please tap lightly, do not use too much or too much force, and do not touch the screen surface with hard objects;

8. Regularly add lubricating oil to each transmission part and sliding surface of the machine to ensure that the machine is in a good lubrication state. Especially the large bearing of the laminating roller is easy to volatilize due to the high pressure and high temperature. Add high-temperature lubricating oil in time (preferably add high-temperature lubricating oil every 50 hours in heating operation) to make it work normally under high temperature and high pressure. The lubricating oil should be regularly added at the rotating shaft to ensure reliable rotation;

9. When the laminating machine is used every day, lubricate the drive chain with a small amount of oil every month, and clean the chain once every six months. Every year, a thorough inspection of the machine is carried out, and problems are found to be solved in time.